×

The Stump Grinding Process Finally Explained

calender-icon November 7, 2019

Many people don’t understand how to use a stump grinder in Cedar Rapids, Iowa, or know how professionals use these machines to make their yard clean and free of debris. Thankfully, stump grinding isn’t as hard as it might seem, though it is by no means simple. A skilled expert can help manage this situation and give you the help that you need to manage your ugly stumps.

Stump Examination is Crucial

No two stumps are made alike, though they may seem quite similar at first glance. That’s because a large number of these wooden growths extend further below the ground than you might think. Others might have a stronger amount of wood at the center that makes it harder to work on them. As a result, you cannot merely take a stump grinder to a stump without examining them first.

For example, you need to have a professional examine the overall size of the stump, which can be larger than anticipated. Professionals fully understand how to gauge the extent of a stump’s roots by merely looking at them. They also know how to test for stump growth under the ground and will measure out just how far you can expect the roots to be when you’re grinding a stump.

Then, they will take the time to find the proper grinder for the job. Not all grinders are made equal, just like not every stump will create the same challenge. As a result, it is crucial to examine the many different grinder options on the market and to choose one that will suit your needs. Doing so helps to ensure that things go as smoothly as possible for you and the stump grinding process.

Choosing a Proper Grinder

The first type of grinder to consider is a hand-manipulated handlebar machine. These machines are often the easiest for amateurs to utilize because they don’t require a lot of professional experience. Self-propelled machines are more significant but similar in that they need you to hold the handles on the stump grinder while you work. Doing so helps to keep it strong and focused on proper grinding tasks.

The next type is tow-behind machines, which are usually available from professionals. They are, as their name implies, towed behind a truck or a trailer and placed over the stump. Typically, they are a good idea for those stumps that are quite large and need more extensive grinding. Lastly, there are truck-mounted machines that are driven like a vehicle and placed over the most significant type of stump.

The decision to choose a grinder is based on a number of different factors. For example, the diameter of the stump at its widest point gauges how large the grinder’s blades must be. The height of the stump is also critical for the process. Very large and tall stumps need more powerful grinders to manage. However, the kind of stumps common in many yards may only require a more basic grinder to destroy.

Grinding the Stump

After you choose the best stump grinder for the job, the process itself is relatively simple. The grinder is positioned over the stump using the proper lifting tools on the grinder. Once the height and width are correctly set, the grinder is locked into place. The grinding professionals then examine the stump properly before they turn on the grinder.

As the grinder runs, spinning blades will contact the wood and grind them up. A good grinder typically has a hose that captures the wood chips and throws them out to an appropriate position in your yard. However, chips may still fly from the bottom of the grinder, so anybody standing in the yard should have eye protection and long, heavy clothes on to avoid getting injured.

The grinder is slowly lowered over the stump as it grinds to eliminate all of the wood as effectively as possible. Moving too fast will cause the grinder to seize up and may cause other complications. Issues that pop up may include an unexpectedly hard area on the stump. Professional help is crucial here, as these experts can adjust the speed and power of the grinder to get through these difficult areas.

Disposing of the Chips

Lastly, a good stump grinder needs to dispose of the wood chips in a way that is simple and efficient. Most of the time, you’re going to end up with a halo or skirt of chips around the stump as it is ground down to the Earth. Typically, the chips will be around four times the volume of the stump as it existed entirely, which means you’re likely going to have a large number of chips to eliminate.

Many professionals will place a plastic skirt around the stump that is large enough to collect most of the chips as they fall. Then, they wrap up the chips or scoop them up into a bag to ensure that your yard is clean. If any stray chips popped off of the skirt as they grind the stump, they will then pick them up and throw them in the bag. Appropriately done, chip disposal should be reasonably easy to handle.

However, if you try to grind a stump on your own without professional help, you’re likely to find that this process is harder than you might imagine. You might miscalculate the size of the plastic skirt and let a large number of chips hit the ground. And if you are reading this article after you ground a stump without a skirt, you may be disappointed to know that you need to pick them up by hand. Work with professionals to avoid this kind of annoyance.

Let Us Help Grind Your Stumps

If you’re looking for the best stump grinder Cedar Rapids, Iowa has to offer, please contact us at Frank’s Tree Service right away to learn more. Our professionals have years of experience working with people like you and can do what is necessary to ensure that things go smoothly. Each of our professionals will carefully examine your stump to find the grinder that works for your needs.

Share Article

Contact Us For a Free Estimate

Tel: 319-774-7937

Contact Us For a Free Estimate

Tel: 319-774-7937

Email: frankstreeservice@outlook.com